Commits

Peter Chen committed 3dc34bfa723
ENGR00161314-1 mx6q usb-host: add hsic support MSL part Add HSIC support for Host2 and Host3, for HSIC mode, there is not usb phy needed, the usb device is always at the board - Validation hardware: iMX6Q Validation Port Card and Re-worked Rev X3 board, for hardware rework detail, contact Ken Sun (b03826) - Validation device: HSIC interface SMSC HUB(USB4640) and Host 3. Host 2 is coding finishes, but not verified due to hardware limitation. - Pin Conflict with Ethernet, order to use HSIC, the user need disable ethernet function at both u-boot and linux kernel. For u-boot: please undefine CONFIG_MXC_FEC at your board config file For kernel: please define CONFIG_USB_EHCI_ARC_HSIC, the entry is: Device Drivers---> USB support---> Support HSIC Host controller for Freescale SoC - Suspend/resume and wakeup are not supported due to IC issues, these IC issues will be fixed at TO1.1 for i.mx6, software will add these support after receiving TO1.1 chip. Signed-off-by: Peter Chen <peter.chen@freescale.com>